| BRAND | HOMA |
| Product | 9505006.03 |
| Internal code | IMP4892598 |
| Custom code | 84137021 |
| Technical specification | GRP16D Promoting domestic, municipal and industrial waste water and faeces, even with coarse and fibrous ingredients. The one in front of the wheel built-in cutter shreds all cuttable solids in such a way that Discharge medium through pipes DN 50 can be pumped. DIN EN 12050-1: TÜV certified, Design tested and monitored. Maximum temperature of the pumping medium: 40°C Up to 60 °C for a short time Type of construction: Single-stage submersible motor pump for transportable as well as stationary Deployment hydraulics: pump housing with horizontal G 2 AG pressure connection. Open multi-blade wheel with upstream cutting device for crushing solids. Shaft seal: Independent of the direction of rotation Combination of mechanical seal (silicon carbide/silicon carbide) and Radial seal in oil barrier chamber. oil-filled sealing chamber with Possibility of control by inspection screw. Shaft bearing: Robust, maintenance-free, permanently lubricated rolling bearings. tight electric motor with 2-pin winding coil insulation class H, Protection class IP 68. Thermal sensor in the Winding for temperature monitoring. Monitoring via PTC optional possible. Engine cooling Motor with surface cooling in Dive operation. operating mode: The motor is for operating mode S 1 (continuous operation) with a max. Switching frequency of 15 circuits/ hour with submerged engine laid out. materials: Motor housing: cast iron EN-GJL-250 Pump housing: cast iron EN-GJL-250 Engine bearing housing: cast iron EN-GJL-250 Impeller: cast iron EN-GJL-250 Cutting device: stainless steel 1.4122, 55HRC. Motor shaft: stainless steel 1.4104 Mechan. Connecting parts: stainless steel O-rings: NBR Mechanical seal (medium side): SiC/SC Shaft seal (motor side): NBR Upper bearing: deep groove ball bearing Painting/coating: Two-component paint on epoxy resin base, RAL 9005 specifications Delivery rate Q: 19.8 m? /h - 0.0 m*/h Delivery height Hman: 0.2 m - 20.8 m Power P1:1.3 kW Power P2:0.9 kW Frequency: 50 Hz Voltage: 400 V ‚Type of electricity: 3- Rated current: 2.5 A Start type: Direct Pressure connection: G 2 AG Weight: 27 kg Speed: 2900 rpm ‚Connection cable: HOTRNS-F PLUS - 661.5 Length of connection cable: 10 m Box contents: With Iosem cable end. manufacturer: HOMA |
Press on flag images to see contact information!
