| BRAND | Boll Kirch |
| Product | 6.18 Gr 100 DN 100 |
| Description | automatic filter |
| Internal code | IMP5057252 |
| Technical specification | Filter type 6.18TI1 Size 100TI1 Connection diameter DN 100TI1 Connection flanges in accordance with DIN 2501/EN 1092-2 PN 10TI1 Dimension sheet Similar to Z44617 -- OPERATING CONDITIONS --- Fluid to be filtered coolant Ti1 PED 2TI1 fluid group Fluid type according to PED liquid TI1 Maximum flow rate not specifiedI1 Operating overpressure 5.00 barTi1 Maximum allowable pressure 10.00 BarTi1 Permission Operating temperature min 0.00 °CTI1 Permission Operating temperature max 60.00 °CTI1 Required prefiltration 10.00 mm --- BACKWASH --- EigenmediumTI1 backwash medium Minimum operating pressure after filter 2.00 BarTi1 Flushing rate 3.00 l/s at 2.00 bArTi1 Rinsing time 30 stI1 Motor power 0.090 kWTi1 Operating voltage 3 ph 400 VoltTi1 Frequency 50 HzTi1 Control voltage 230 VoltTi1 Type 2310TI1 controller Supplied loosetI1 Control language EnglishTI1 TIU2 --- CONSTRUCTION/APPROVAL --- Design and layout PED2014/68/EU AD-2000TI1 Volume of the container 0.00 literTi1 Empty weight 185 kgTi1 Pressure test according to Boll & KirchTi1 TIU2 --- MATERIALS --- Filter housing made from EN-GJS-400-15TI1 Internal parts made of stainless steel Ti1 PerbUnanti1 seal Seals made from PerbUnanti1 TIU2 --- FILTER ELEMENTS --- Element type split candle made of stainless steel Ti1 No. of filter elements 12TI 1 Plastic candle headpiece and end piece Ti1 Gap size 500 μmTi1 Total screen area 4368 cm²Ti1 TIU2 --- ACCESSORIES --- Attached differential pressure indicator 4.46.2 (optical + electrical) TI1 Differential pressure setting backwash 0.60 bar/Alarm 0.80 barTi1 Electrically powered sludge removal valveTI1 Mud drain valve nominal size DN 32TI1 --- ACCESSORIES/MOUNTING MATERIAL---CAT Cover screws/nuts and washers made of VATI1 --- Accessories/other---CAT JaTi1 lifting eyes TIU2 --- CORROSION PROTECTION --- Exterior primer 2K-Ep RAL 5005 100-200 μmTi1 Corrosion protection inside epoxy Operator/factory plate EnglishTI1 NachTi1 label - Machinery Directive CE |
default.send_request_amp_Group2