| BRAND | Boll Kirch |
| Product | P/N: 373154, Type: BFD-P HD 115.280 DN 1 |
| Description | double filter |
| Internal code | IMP4434048 |
| Custom code | 842139 |
| Technical specification | Filter type: BFD-P HD M Case Size (G.Q) :115,280 size: 02 Nominal connection diameter: DN 1" connecting flanges according to: ASME, 300 lbs, RF Dimension sheet: similar to Z138270 fluid to be filtered: ammonia Fluid group according to PED: 1 Fluid type according to PED: gas Max. flow rate: 100.00 Nm³/h Maximum allowable pressure: 40.00 bar (g) perm. Operating temperature min: 0,00 °C perm. Max. operating temperature: 100,00 °C Pressure drop with clean sieves: < 0.1 bar at 100.00 Nm³/h Design and design: ASME VIII Div.1/ped2014/68/EU (without stamp) : Art. 4, para 3 Volume of container 2x: 0.50 litres Pre-check the drawing by: customer Pressure test according to: Boll & Kirch with certificate Material certificates: EN 10204/3.1 — Construction/acceptance — Preliminary inspection documents consisting of: calculation: yes drawings: yes BOM: yes 3-D model step format: yes Earthquake exposure: no Nozzle loads: no wind loads: no — Construction/application — PMI: no NACE: no — Construction/form certificates — Q-plan: FB-8-65 Q-Plan BFD-X gas FB-7-80 pressure test 3.1: min. 1.5 x design FB-7-80 pressure test 3.1: holding time 30 min. FB-7-88 gas pressure test 3.1: min. 1.1 x design Filter housing manufactured from: 316 L/316 Type of changeover valve: ball valve switching Material of diverter valve: 316 L/316 Switching valve internal parts: 316 L Cover seals made of: EPDM Circuit seals off: EPDM Item type: HC1-G VA Material of the element: stainless steel Number of disposable cartridges 2x: 1 Filter fineness: 5 μm Attached differential pressure indicator: without — Accessories/connectors — Vent: with plug 1/2" NPT emptying: with plug 1/2" NPT Differential pressure port: with 1/2" NPT plug — Accessories/nozzle orientation — Admission: 180° Exit: 180° Switch lever: 180° Earthing connection: 0° venting: 0° emptying: 0° wall mount: 0° differential pressure connection: 0° Manufacturer plate: 90°/270° — Accessories/differential pressure measurement — Pressure compensation line with 3 mm aperture: yes — Accessories/others — Grounding tab: yes Wall mount: yes Foot attachment: no Outer primer: WITHOUT Corrosion protection inside: WITHOUT |
default.send_request_amp_Group2