| BRAND | Warex |
| Product | DKZ110 DN 150 |
| Description | butterfly valve |
| Internal code | IMP252847 |
| Weight | 1 |
| Custom code | 84818085 |
| Technical specification | type DKZ110 DN 150 face to face 40 mm for mounting between flanges, drilled according to EN 1092, PN 10 body of Silumin disc of stainless steel 1.4408 shaft of stainless steel stainless steel 1.4057 or equivalent shaft sealing with o-rings bearing bush of brass sealing element of Silicone red fixed vulcanized in the housing additional attachments: handlever12° for DKZ103/110, 7-pin ratched, 90°, made of alu limit switch box with 2 sensors Turck Ni 4-M12-AZ 31X normally open, 20-250 V AC/ 10-300 V DC, IP 67 all-electricity version mounted in housing of makrolon 175/80/55 wired on terminal for medium: air, fluidgroup 2 characteristics: chemical not aggressive, not sticky working pressure: 0,5 bar max. allowable working pressure: 1,0 bar (Ps) MAWP (note: MAWP = design pressure) max. allowable working temperature: 0 °C ... + 100 °C (Ts) MAWT ambient temp.: 0 °C ... + 50 °C (Ta) Ex-protection: No requirement Rating of butterfly-valves according PED/2014/68/EU, diagram 7 Certified module A2 The butterfly-valves are not subject to this conformity assessment test pressure: design pressure x 1,1 bar for tightness |
default.send_request_amp_Group2