| BRAND | Aviteq |
| Product | 31996 |
| Internal code | IMP5102309 |
| Weight | 3 |
| Technical specification | As network protection, we recommend protection in accordance with the rated current of the connected magnetic vibrator (inertial fuse). Vibration rate SA.. 25.. 1.500 min-1 SAT.. 30.. 1,800 min-1 SAT.. 33.. 2,000 min-1 SAT.. 40.. 2,400 min-1 SAT.. 50.. 3,000 min-1 SAT.. 60.. 3,600 min-1 Display Seven LEDs show the operating status version for installation in central control stations, power cable without incl. control potentiometer set Thyristor protection, via fuse (superflink) Network fluctuation compensation ± 10%, the oscillation width remains constant Network tolerance, allowable voltage ± 10% Frequency ± 0.5% Proportional change in the setpoint range Switch release (continuous contact, potential-free) or voltage signal +24 V (DC) or optocoupler Inputs to external external control variables 0.. 10 V (DC), 0/4.. 20 mA (DC) Sensor input for AViTEQ PA or PAL vibration sensor Remote monitoring outputs, relay output protective function When used on magnetic vibrators with an integrated PAL sensor Version SA.. -2 MV-... P (8V) Version SA.. -2V MVE33-1, MVF33-1, MVF33-2, MVG33-1 (P), MVH33-1 (P) (10V) Voltage and frequency control with impact monitoring When used with an external PA vibration sensor Version SA.. 2S1 payload control Magnetic vibrator temperature switch monitoring Additional TXAE board required when operating with multiple drives (version.. - 2X) |
default.send_request_amp_Group2